Sample Questions

NewRocket requires a network connection between the main corporate building and a very small building on a campus. This connectivity needs to provide at least 700 Mbps throughput using a wireless solution. An AP will be placed inside each building's lobby near the entrance glass doorway that interconnects the two buildings. The distance between these two doors is approximately 30 feet (10 meters). The connection to the closest wiring closet in each respective building is approximately 280 feet (86 meters) for each AP. The customer needs a solution that will:

• Provide a dedicated 5 Ghz radio for lobby connectivity
• Provide meshing on a dedicated 5 Ghz radio to interconnect the two buildings with an appropriate integrated antennas

Which solution would best meet NewRocket's requirements?

• Aruba AP 500 with MMF cabling
• Aruba AP 535 with Cat 7 cabling
• Aruba AP 374 with MMF cabling
• The Aruba AP 387 with Cat 7 cabling

A network architect is analyzing the current wireless coverage in a new design. Standing 10 feet (approximately 3 meters) away from the AP, the architect tests the wireless signal from the AP. The architect then moves 20 feet (approximately 6 meters) away from the AP and repeats the test. Given that the architect detects no external interference with the signal, by how much would you expect the signal to degrade between the two tests?

• By a factor of 8
• By a factor of 4
• By a factor of 1
• By a factor of 2

A wiring closet with a POE+ switch is 300 feet (100 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is also capable of 10 Gbps. The cable type is Cat6a STP. What is the maximum speed that the customercan expect from the connected AP?

• 2.5 Gbps
• 1 Gbps
• 10 Gbps
• 5 Gbps

How would a network administrator view the price list of the equipment in one wiring closet?

• Create a Workspace in the site; set filter in the BOM to the Workspace
• Create a Wiring Closet in the site; set the filter in the Design Group to Wiring Closet
• Create a Design Group in the site; set the filter in the BOM to the Design Group
• Create a Design Group in the Site; set the filter in the Layers to Design Group

When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?

• Number of users per location
• Mobility requirements and usage
• Density of users
• Type of users

Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)

• Providing consistent performance on all available channels
• Determining the RF channel bandwidth consumed per Barcode scanner
• Roaming between APs
• Implementing adequate security measures to ensure PCI compliance
• Encountering RF interference by devices

A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.

Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements?

• A standalone 7008 controller per floor
• Two 7030 mobility controllers in a cluster
• An IAP cluster per floor
• Two 7205 mobility controllers in a cluster

Which must you perform in IRIS to assign a device to a Design Group?

• Drag and drop the device into the Design Group
• Right-click the device and select Set Design Group
• Drag and drop the device into the Site
• Right-click the device and select Set Layer Membership

A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards.

What type of survey should the network architect perform?

• Virtual
• Active
• Spectrum clearing
• Passive

HP HPE6-A66日本語 Exam Syllabus Topics:

Reference: https://certification-learning.hpe.com/TR/datacard/Exam/HPE6-A66

How much Aruba Certified Design Associate Exam costs

• Types of questions: Performance Based Questions
• Examination Fees: $180 USD
• Examination Name: Aruba Certified Design Associate Exam
• Passing Score: 67% or higher
• No of Questions: 52 Questions
• Length of Exam: 90 min

Difficulty in Attempting Aruba Certified Design Associate Exam

Our HP HPE6-A66 practice exam and HP HPE6-A66 exam dumps are prepared by industry experts with combine experience of decades to make sure that all of the document necessary for you to pass the certfiication exam has been added and it is easily comprehensible. The HP Aruba Certified Design Associate (ACDA) questions and answers in our study guides and exam dumps have been made consciously easy and graspable so that all exam takers learn them without any hassle and in minimum time. As a result, they never pose any hurdle in your learning as it often happens in case of un-authentic online course free or any other substandard source of learn online. Our HP Aruba Certified Design Associate (ACDA) products prove immensely beneficial to all exam takers because they have been crafted keeping in view the actual needs of test takers and provide them maximum benefit.

We suggest you to get practice questions and answers that introduce you to the actual exam format and the study questions, you are expected to answer in the real exam.