Study with A4040-109 most valid questions & verified answers

Pre-trying free demo

It can be understood that only through your own experience will you believe how effective and useful our Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 exam study material are. When you visit our website, it is very easy to find our free questions demo of A4040-109 exam prep material. It is available for you to download and have a free try. Although there are parts of the complete study questions, you can find it is very useful and helpful to your preparation. According to the free demo questions, you can choose our products with more trust and never need to worry about the quality of it. With our Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 study material, you can clear up all of your linger doubts during the practice and preparation.

It is well known that Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 exam is an international recognition certification, which is very important for people who are engaged in the related field. The preson who pass the A4040-109 exam can not only obtain a decent job with a higher salary, but also enjoy a good reputation in this industry. But it is difficult for most people to pass Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 exam test. While, our Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 practice questions can relieve your study pressure and give you some useful guide. We have been sparing no efforts to provide the most useful study material and the most effective instruction for our customer.

DOWNLOAD DEMO

Less time for high efficiency

As for many customers, they are all busy with many things about their work and family. So, if there is a fast and effective way to help them on the way to get the Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 certification, they will be very pleasure to choose it. Here, our A4040-109 training material will a valid and helpful study tool for you to pass the actual exam test. With the IBM Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 exam training questions, you will narrow the range of the broad knowledge, and spend time on the relevant important points which will be occurred in the actual test. Thus, you will save your time and money on the preparation. After the analysis of the feedback from our customer, it just needs to spend 20-30 hours on the preparation. Through the notes and reviewing, and together with more practice, you can pass the actual exam easily.

Good after-sale service

Easy4engine are trying best to offer the best valid and useful study material to help you pass the IBM Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 exam test. We have good customer service. If you have any questions about our products or our service or other policy, please send email to us or have a chat with our support online. Our 24/7 customer service are specially waiting for your consult. We are trying our best to help you pass your exam successfully. Besides, in case of failure, we will give you full refund of the products purchasing fee or you can choose the same valued product instead.

IBM A4040-109 Exam Syllabus Topics:

IBM Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 Sample Questions:

Question 1

A second virtual disk has been added to a SuSE Linux LPAR on the existing vhost0 adapter. What must be done for this disk to be recognized on the Linux LPAR?

A. /usr/bin/rescan-scsi-bus
B. echo "- - -" > /sys/class/scsi_host/host0/scan
C. /usr/bin/cfgmgr
D. /bin/kpartx -a -v /dev/sdb

Question 2

A customer is consolidating two POWER6 595 servers to a single Power 795. The two 595 servers each have 24 active processors and have the following LPARs using dedicated processors, running continuously:

The new Power 795 system will have two Processor Books (nodes), each with 8 cores activated in all MCMs (Multi Chip Modules).
LPAR1 is in need of more processing power. If all the other LPARs keep their existing Processor allocation, what is the maximum number of processors which can be allocated to LPAR1?

A. 32
B. 27
C. 36
D. 100

Question 3

A VIO server provides a virtual Fibre Channel adapter to each of 2 LPARs. The HBA has recently been replaced on the VIO server. After the VIO server was rebooted, the clients LPARs were also rebooted. The LUNs are now showing as "Defined" instead of "Available". What is the cause?

A. The client virtual Fibre Channel adapters were configured via DLPAR.
B. The client virtual Fibre Channel needs a map to the new WWPNs.
C. The HBA requires an initial configuration to be performed.
D. The HBA created new WWPNs on the virtual Fibre Channel adapters.

Question 4

An architect has been given the task of incorporating some new Power Systems servers running AIX 7 into an existing data center which is supported by a legacy SAN.
The new servers will need to be connected to the SAN, and the LPARs on the servers will each have access to a Fibre Channel Tape using virtualized devices.
Which action will the architect need to take?

A. Check that the SAN switches support NPIV.
B. Put the tape drive into the same zone as the HBA in the VIOS.
C. Use the legacy Fibre Channel device driver in AIX.
D. Specify that AIX Enterprise Edition must be used.

Question 5

An administrator would like to perform a Live Partition Mobility (LPM) operation between two systems. The source system has been configured with a single VIO Server (VIOS) partition and the destination system has been configured with dual VIO server partitions. What must be considered when planning for LPM?

A. Device-level virtualization provided by the single VIOS of the source system must be matched by both of the dual VIOS on the target system.
B. An LPAR must be configured on the target system before the LPM operation is invoked.
C. Access to all the disk data must be completely provided by at least one of the destination VIO Server partitions.
D. A second VIO Server partition must be configured on the source system to allow for LPM.

Solutions: