Study with GB0-381-ENU most valid questions & verified answers

Less time for high efficiency

As for many customers, they are all busy with many things about their work and family. So, if there is a fast and effective way to help them on the way to get the H3C Large-Scale Routing Network Technologies V2.0 certification, they will be very pleasure to choose it. Here, our GB0-381-ENU training material will a valid and helpful study tool for you to pass the actual exam test. With the H3C H3C Large-Scale Routing Network Technologies V2.0 exam training questions, you will narrow the range of the broad knowledge, and spend time on the relevant important points which will be occurred in the actual test. Thus, you will save your time and money on the preparation. After the analysis of the feedback from our customer, it just needs to spend 20-30 hours on the preparation. Through the notes and reviewing, and together with more practice, you can pass the actual exam easily.

Good after-sale service

Easy4engine are trying best to offer the best valid and useful study material to help you pass the H3C H3C Large-Scale Routing Network Technologies V2.0 exam test. We have good customer service. If you have any questions about our products or our service or other policy, please send email to us or have a chat with our support online. Our 24/7 customer service are specially waiting for your consult. We are trying our best to help you pass your exam successfully. Besides, in case of failure, we will give you full refund of the products purchasing fee or you can choose the same valued product instead.

It is well known that H3C Large-Scale Routing Network Technologies V2.0 exam is an international recognition certification, which is very important for people who are engaged in the related field. The preson who pass the GB0-381-ENU exam can not only obtain a decent job with a higher salary, but also enjoy a good reputation in this industry. But it is difficult for most people to pass H3C Large-Scale Routing Network Technologies V2.0 exam test. While, our H3C Large-Scale Routing Network Technologies V2.0 practice questions can relieve your study pressure and give you some useful guide. We have been sparing no efforts to provide the most useful study material and the most effective instruction for our customer.

DOWNLOAD DEMO

Pre-trying free demo

It can be understood that only through your own experience will you believe how effective and useful our H3C Large-Scale Routing Network Technologies V2.0 exam study material are. When you visit our website, it is very easy to find our free questions demo of GB0-381-ENU exam prep material. It is available for you to download and have a free try. Although there are parts of the complete study questions, you can find it is very useful and helpful to your preparation. According to the free demo questions, you can choose our products with more trust and never need to worry about the quality of it. With our H3C Large-Scale Routing Network Technologies V2.0 study material, you can clear up all of your linger doubts during the practice and preparation.

H3C GB0-381-ENU Exam Syllabus Topics:

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. In the IS-IS network shown in the figure, after the routes of each router are stable, the IS-IS Level-1 routes in the IS-IS LSDB of the RTE have ______.

A) 10.1.5.0/30
B) 10.4.5.0/30
C) 10.1.4.0/30
D) 10.3.4.0/30

2. An MSR router has three interfaces whose IP addresses are Loopback0:192.168.1.1/32, Loopback1:192.168.2.1/32, and GE0/0:192.168.3.1/30.
Run OSPF protocol and enable OSPF on three interfaces at the same time, then the Router ID selected by this router is _______.

A) 192.168.2.1
B) Depending on the situation, which interface is enabled with OSPF protocol first, the IP address of which interface is selected as the Router ID
C) 192.168.1.1
D) 192.168.3.1

3. There are two detailed routes 10.10.1.0/24 and 10.10.2.0/24 in the BGP routing table. The user requests to advertise 10.10.1.0/24 and the aggregated route 10.10.0.0/16, but not 10.10.2.0/24. How to achieve ?

A) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 origin-polictest route-polictest permit node 10 if-match acl 2000
B) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 origin-polictest route-polictest dennode 10 if-match acl 2000 route-polictest permit node 20
C) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 suppress-polictest route-polictest dennode 10 if-match acl 2000 route-polictest permit node 20
D) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 suppress-polictest route-polictest permit node 10 if-match acl 2000

4. Among the following types of LSAs, the ones allowed to exist in the backbone area are _________

A) Tpe2 LSA
B) Tpe4 LSA
C) Tpe1 LSA
D) Tpe3 LSA

5. In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA] ospf 1 router-id 1.1.1.1
RTA-ospf-1] area 0
RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTA-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
RTB] ospf 1 router-id 2.2.2.2
RTB-ospf-1] area 0
RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
RTB-ospf-1] area 1
RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTC] ospf 1 router-id 3.3.3.3
RTC-ospf-1] area 1
RTC-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTC-ospf-1] area 2
RTC-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTC-ospf-1-area-0.0.0.2] network 3.3.3.3 0.0.0.0
RTD] ospf 1 router-id 4.4.4.4
RTD-ospf-1] area 2
RTD-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTD-ospf-1-area-0.0.0.2] network 4.4.4.4 0.0.0.0
Then the routes that can be observed on the RTD are ________

A) 3.3.3.3/32
B) 192.168.2.0/24
C) 1.1.1.1/32
D) 192.168.3.0/24

Solutions: