100% Pass Your E_S4HCON2020 Exam Dumps at First Attempt with Easy4Engine
Penetration testers simulate E_S4HCON2020 exam PDF
SAP E_S4HCON2020 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| SUM Execution Part > 12% | Perform the SUM execution part, including DMO
|
| SUM Monitoring and Troubleshooting 8% - 12% | Monitor and troubleshoot the SUM procedure
|
| SUM Prepare Part > 12% | Perform the SUM prepare part
|
NEW QUESTION 11
You are planning an SAP S/4HANA conversion. Which conversion-specific tasks need to be performed during the preparation phase?
There are 2 correct answers to this question.
Response:
- A. Check the compatibility of custom code with SAP S/4HANA
- B. Apply the recommendations of the simplification list
- C. Run the database migration to the SAP HANA database
- D. Perform the migration of data into the new data structure
Answer: A,B
NEW QUESTION 12
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:
- A. The DMO Guide
- B. The major SUM Guide
- C. The SAP S/HANA Conversion Guide
- D. The Application Guide
Answer: A,C
NEW QUESTION 13
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Depending on the SAP S/4HANA version, there are different SI check frameworks.
- B. The SI checks are executed in the development system and the results are transported into the subsequent systems.
- C. You need to build up a SI check framework by applying SAP notes.
- D. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.
Answer: A,C
NEW QUESTION 14
In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.
Response:
- A. During downtime
- B. During uptime
- C. During SPDD
- D. Post-downtime
Answer: B,D
NEW QUESTION 15
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Shadow repository creation (EU_IMPORT*)
- B. Parallel distribution (PARDIST_SHD)
- C. Uptime migration (EU_CLONE_MIG_UT_RUN)
- D. Downtime migration (EU_CLONE_MIG_DT_RUN)
Answer: C
NEW QUESTION 16
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. SYCM (Simplification Database Content)
- B. ATC (ABAP Test Cockpit)
- C. SAT (Runtime Analysis)
- D. SE80 (Object Navigator)
Answer: B,D
NEW QUESTION 17
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are kept as In the start release
- B. Before continuing with the next phase SUM asks for a modification adjustment transport
- C. SUM continues with the next phase and your modifications are lost
- D. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
Answer: A
NEW QUESTION 18
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of eCATTs for business validation tests
- B. Execution of SPDD modification adjustment
- C. Creation of the table structures in the new SAP HANA database
- D. Execution of XPRAs and AIMs
- E. Execution of SPAU modification adjustment
Answer: A,D,E
NEW QUESTION 19
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the main configuration option "Single System" in case of an upgrade
- B. Using the database migration option (DMO) for SUM
- C. Using the main configuration option "Standard" when applying SAP Support Packages
- D. Using the main configuration option "Single System" when installing an Add-On
Answer: D
NEW QUESTION 20
You want to use the downtime-optimized data conversion for your SAP S/4HANA conversion. What is the main difference from a standard SAP S/4HANA conversion?
Please choose the correct answer.
Response:
- A. An additional temporary database is used during uptime
- B. Dedicated application tables are migrated in uptime
- C. The repository is migrated in uptime
- D. TABIMJJPG is executed in uptime
Answer: B
NEW QUESTION 21
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? There are 2 correct answers to this question.
- A. Depending on the SAP S/4HANA version, there are different SI check frameworks.
- B. The SI checks are executed in the development system and the results are transported into the subsequent systems.
- C. You need to build up a SI check framework by applying SAP notes.
- D. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.
Answer: A,C
NEW QUESTION 22
You are upgrading a three-system landscape DEV - QAS - PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system.
What do you need to consider?
Please choose the correct answer.
Response:
- A. The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.
- B. The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.
- C. The upgrade of the PRD must be finished before you start new development in the DEV.
- D. The transport between Unicode and non-Unicode systems is forbidden.
Answer: B
NEW QUESTION 23
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests that are assigned to the project SAP_ADJUST
- B. By searching for transport requests named <SID>K0<number>
- C. By searching for transport requests in the file umodauto.Ist
- D. By searching for transport requests in DIR_TRANS, subdirectory "transport"
Answer: C
NEW QUESTION 24
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It performs a comparison on all tables using row counts.
- B. It performs a comparison of all tables using check sum.
- C. It does NOT perform any table comparison.
- D. It performs a comparison on selected tables using check sum.
Answer: A
NEW QUESTION 25
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. Stack XML file calculated by the Maintenance Planner
- B. Breakpoint configuration file SAPUPPHAS.BRK
- C. Parameter file SAPup_add.par
- D. MIGRATE J5T_DUR_XML file from a previous run
Answer: A,D
NEW QUESTION 26
......
E_S4HCON2020 Exam Certification Details:
| Duration: | 90 mins |
| Exam: | 40 questions |
| Sample Questions: | SAP E_S4HCON2020 Exam Sample Question |
| Cut Score: | 68% |
| Level: | Specialist |
SAP E_S4HCON2020 Exam Description:
The "SAP Certified Technology Specialist - SAP S/4HANA Conversion and SAP System Upgrade" certification exam validates that the candidate possesses the required level of knowledge to perform a technical SAP S/4HANA conversion and an SAP system upgrade. This certification proves that the candidate has an overall understanding and the in‐depth technical skills required. Armed with an understanding of SAP system administration, the candidate can implement this knowledge practically in SAP projects. The enablement for this exam is being provided by the course "ADM328 - SAP S/4HANA Conversion and SAP System Upgrade". It is highly recommended that you have passed the exam C_TADM55_74 or C_TADM55_75 or C_TADM55A_75 prior to taking this exam.
All E_S4HCON2020 Dumps and Training Courses: https://www.easy4engine.com/E_S4HCON2020-test-engine.html
