New 2021 CRE exam questions Welcome to download the newest Easy4Engine CRE PDF dumps (265 Q&As)
P.S. Free 2021 ASQ Certification CRE dumps are available on Google Drive shared by Easy4Engine
NEW QUESTION 16
When requesting "worst case" design analysis, you expect the reliability group to:
Response:
- A. Analyze the worst rejects.
- B. Determine whether product requirements can be met with subassemblies assumed at their worst combination of tolerances.
- C. Analyze only those products failing to meet specification requirements.
- D. Assume all subassembly tolerances are at their maximum limit.
Answer: B
NEW QUESTION 17
Product safety standards do NOT include:
Response:
- A. Requirements for general, equipment and component safety.
- B. Performance requirements for products.
- C. Product requirements laws passed by government
- D. Evaluation requirements for product safety testing.
Answer: B
NEW QUESTION 18
In the binomial expression:
Response:
- A. The sum of the exponents of each term after expansion is equal to the sample size.
- B. The sum of the coefficients of each term after expansion is equal to the sample size.
- C. The sum of the exponents after expansion has no relation to the sample size.
- D. The sum of the exponents of all the terms after expansion is equal to the sample size.
Answer: A
NEW QUESTION 19
Which of the following activities is MOST effective in increasing reliability during a product's life cycle?
Response:
- A. Developing capable processes.
- B. Developing robust design.
- C. Improving gage repeatability and reproducibility
- D. Developing an aggressive testing strategy.
Answer: B
NEW QUESTION 20
Which of the following is an appropriate use for experimental design?
Response:
- A. Establishing product requirements.
- B. Analyzing customer complaint reports.
- C. Ensuring the robust design of a product.
- D. Developing a fault-tree analysis.
Answer: C
NEW QUESTION 21
A product - design team is in the material-selection phase for a new product. The following four treatments need to be considered:
What is the maximum number of treatment combinations?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 22
Which answer describes the MOST significant difference that Reliability Engineering has, compared to the Quality Profession?
Response:
- A. None of the above.
- B. It concerns customer satisfaction immediately after purchase.
- C. It concerns product conformance with specifications.
- D. It concerns failures over time.
Answer: D
NEW QUESTION 23
The continuous improvement process can be guided by several techniques. Which of the following is the BEST approach?
Response:
- A. The original seven quality tools
- B. The new seven quality management tools
- C. Use of the PDCA cycle
- D. Multi-vari charts
Answer: C
NEW QUESTION 24
Fifteen(15) motors were tested for a total of 1,200 cumulative hours, with four failure occuring. The test was then failure-truncated. If the failure rate is assumed to be constant, what is the 95% lower confidence limit of MTBF?
Response:
- A. 609 hours
- B. 131 hours.
- C. 155 hours.
- D. 876 hours.
Answer: C
NEW QUESTION 25
A standard parts program is likely to have which of the following positive and negative effects?
Response:
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 26
Which of following is NOT elements of risk priority number for FMEA?
Response:
- A. Severity
- B. Catastrophic
- C. Detection
- D. Probability
Answer: B
NEW QUESTION 27
The prediction technique has obviously not always been effective quantitatively. There is often a wide difference between actual reliability and predicted reliability. Nevertheless, the reliability prediction technique permits:
Response:
- A. Separating out "the vital few" from the "trivial many".
- B. Indicating which department is to blame.
- C. Spotlighting what has gone wrong with the program.
- D. Estimating how good the product really is.
Answer: A
NEW QUESTION 28
The main purpose of environmental stress screening is which of the following?
Response:
- A. To eliminate supplier inspections.
- B. To subject parts to extremes
- C. To eliminate infant mortality failures.
- D. To assist in the selection of standardized parts.
Answer: C
NEW QUESTION 29
A company has produced a new module. The failure data on 40 returns are shown below.
If the time to failure follows a normal distribution, what is the probability that time to failure exceeds 20 hours ?
Response:
- A. 0.972
- B. 0.950
- C. 0.050
- D. 0.028
Answer: D
NEW QUESTION 30
When parts are selected for a product in development, which of the following key elements should be considered first?
Response:
- A. Serviceability
- B. Availability
- C. Cost
- D. Application.
Answer: D
NEW QUESTION 31
Risk management includes which of the following?
I. Integration of risk evaluation in all design phases.
II. Knowledge and consideration of liability law.
III. Adopting procedures, policies and practices to control risks.
IV. Providing product labels and operator manuals where appropriate.
Response:
- A. I, II, III and IV
- B. I, II and III only
- C. II and IV only
- D. I, II and IV only
Answer: A
NEW QUESTION 32
When assessing failures during a reliability test program, which of the following should a reliability engineer consider first?
Response:
- A. The hazard rate is increasing.
- B. The hazard rate is constant
- C. The hazard rate is decreasing.
- D. The capability of test equipment
Answer: B
NEW QUESTION 33
Which of the following activities prioritizes failure modes based on probability of failure, severity, and consequences?
Response:
- A. FURPS.
- B. FTA
- C. FRACAS.
- D. FMEA
Answer: D
NEW QUESTION 34
As the reliability engineer overseeing supplier development, you review the supplier's corrective action problem solving guidebook. It is a structured approach and you notice in the problem definition segment that there is a reference to "is data" and "is not data".
You recognize that they are using a technique promoted and championed by:
Response:
- A. Kepner-Tregoe.
- B. Kaoru Ishikawa.
- C. Kaizen Principles.
- D. Deming's PDCA Cycle.
Answer: A
NEW QUESTION 35
......
CRE exam questions from Easy4Engine dumps: https://www.easy4engine.com/CRE-test-engine.html (265 Q&As)
Free 2021 ASQ Certification CRE dumps are available on Google Drive shared by Easy4Engine: https://drive.google.com/open?id=12H0xjHfSQDU3YjpTV-rfn5XVRWlCgKlQ
