[Dec 07, 2023] NCM-MCI-5.20 Exam Dumps PDF Updated Dump from Easy4Engine Guaranteed Success
Pass Your Nutanix Exam with NCM-MCI-5.20 Exam Dumps
NEW QUESTION # 98
A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.
Which three steps should the administrator perform next? (Choose three.)
Answer:
Explanation:
1 allow vms
2 sd CVM
3 sd node
NEW QUESTION # 99
An administrator has a 4-node Nutanix cluster running on AHV. The administrator creates a new storage container and makes that all available to all hosts.
Which storage protocol is used for Virtual Machines to access virtual disks on the storage container?
- A. SMB/CIFS
- B. Fiber Channel
- C. iSCSI
- D. NFS
Answer: C
NEW QUESTION # 100
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. Asyn&DR
- B. NearSync
- C. Leap
- D. Metro Availability
Answer: C
NEW QUESTION # 101
An administrator finds that home shares cannot be configured in a new Files 3.5 deployment. Why is this happening?
- A. NFS default access is set to Read Only.
- B. Multi-protocol access is not configured.
- C. Access Based Enumeration is not enabled.
- D. The system is deployed as a single FSVM.
Answer: D
NEW QUESTION # 102
What are two types of Protection Domains that Nutanix Offers for data Protection? Choose Two
- A. Snapshot
- B. Consistency Group
- C. Async DR
- D. Metro Availability
Answer: C,D
NEW QUESTION # 103
An administrator has two clusters: Site A and Site B.
Async DR is configured between the clusters as follows:
* Site A is the Primary Site
* Site B is the Secondary inactive Site, no VMs running
* Site A is fully in Production
* Site B used as Backup/Disaster Recovery
The customer wants to perform a planned failover between the sites.
How should the administrator accomplish this?
- A. Click Activate on the Secondary site within the Data Protection Dashboard
- B. Choose Migrate on the Secondary site within the Data Protection Dashboard
- C. Choose Migrate on the Primary site within the Data Protection Dashboard
- D. Click Activate on the Secondary site and run deactive NCLI command on Primary site
Answer: C
NEW QUESTION # 104
An administrator is trying to correct high cluster IOPs and Cluster Controller Latency. Networking is the suspected issue.
Which networking parameters should be configured in the Nutanix cluster?
- A. Number of NICs connected and frame size
- B. Number of NICs connected and bond state.
- C. Bond State and network latency
- D. Number of NICs connected and network latency.
Answer: A
NEW QUESTION # 105
An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest's iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?
- A. The performance test is generating small block random 10.
- B. Data Locality ensures that VM attached disks are always faster than iSCSI volumes.
- C. The VM's iSCSI traffic is being routed to the data services IP subnet
- D. The duster data services IP address is a bottleneck, shared with other iSCSI traffic
Answer: D
NEW QUESTION # 106
An administrator needs to provide data integrity at the application level for a VM that is replicated to a secondary site.
Which requirement will satisfy this task?
- A. 1 VM per Protection Domain
- B. 1 VM per schedule
- C. 1 VM per Availability Zone
- D. 1 VM per Consistency Group
Answer: B
NEW QUESTION # 107
A New Project is Being rolled out to an AHV Cluster being monitored by prism Central , The Application team indicated that the application managed by the project is very memory intensive . The administrator wants to be notified about any memory constraints should they occur.
How would an administrator most effectively achieve this task?
- A. Search for the VM , then in the details page , go to metrics an select CPU usage.
- B. Create a new alert policy for the memory Usage and set to critical after 80%.
- C. Create a Report to tracking the memory Usage
- D. Create a new metric chart for the cluster and analyse hypervisor Memory Usage
Answer: B
NEW QUESTION # 108
An administrator is deploying an application that requires maximum I/O throughput for scratch dat a. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?
- A. Create a volume group with one virtual disk attached to the VM
- B. Create a virtual disk attached to the VM's PCI interface
- C. Create several virtual disks attached to the VM's virtual SCSI controller
- D. Create a volume group with several virtual disks and attach to the VM
Answer: D
NEW QUESTION # 109
An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?
- A. 15 minutes
- B. 0 minutes
- C. 1 hour
- D. 6 hours
Answer: A
NEW QUESTION # 110
Refer to the Exhibit.
An Administrator Notices that the Data Resiliency status of some components has been reduced to 0, making it impossible to support a node failure in the cluster.
What failed Component Caused this Issue?
- A. Node
- B. CVM
- C. Disk
- D. Block
Answer: B
NEW QUESTION # 111
An administrator needs to expand a cluster based on AHV and running on Nutanix G5 hardware with a new Nutanix G7 system. The cluster is running AOS 5.10 but the operation fails when expanding the cluster. AOS is running on the new system. There are no issues discovering the node.
Why is the operation failing?
- A. Foundation software has not been updated on the cluster.
- B. G7 hardware cannot be added to a G5 cluster.
- C. AOS version running on G7 is older than the version on the cluster.
- D. EVC needs to be configured before cluster expansion
Answer: C
NEW QUESTION # 112
A customer recently set up Async Replication between Site A and Site B. The customer wants to conduct a planned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?
- A. VMs get deleted from Site B. and the protection domain is now Active.
- B. VMs are powered off on Site A and must be manually powered on at Site B.
- C. VMs get deleted from Site A and the protection domain is no longer active.
- D. Customer must then manually power off VMs at Site A and power them on at Site B.
Answer: C
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-domain-failback-disaster.html
NEW QUESTION # 113
Which Task is Required to initiate a live migration of VMs between two cluster.?
- A. Perform a Leap Planned Failover
- B. Press Migrate Button on the Protection Domain
- C. Replicate VM Recovery Point
- D. Promote Metro Availability Protection Domain
Answer: B
NEW QUESTION # 114
Refer to the exhibit.
An administrator configures Active Directory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.
What configuration change should be made to fix this issue?
- A. Change the plct from 389 to 636
- B. Change the Directory URL to use an IP rather than a name
- C. Change leaps to https
Answer: A
Explanation:
D Change the Domain to use an IP rather than a name
NEW QUESTION # 115
An administrator is managing two AHV and vSphere-Based Clusters. The administrator is able to install a Windows Guest OS from an ISO Image to VMWare VMs , but is unable to do the same activity with AHV VMs.
What should the administrator do to successfully perform this action with AHV VMs?
- A. Manag Nutanix Guest tools
- B. Verify cluster iSCSI data Services IP
- C. Change VM Setting From BIOS to UEFI
- D. Provide virtIO Drivers
Answer: D
NEW QUESTION # 116
An Administrator is concerned that a VM on a hybrid Cluster with 8Gb RAM and 4 vCPU is performing poorly.
An Analysis of the VM indicates that CPU Utilization is at 50% ,memory utilization is at 30% , and disk latency is at 18ms.
What can the administrator do to improve performance?
- A. Enable FLash Mode
- B. Increase vDisk Size
- C. add 4GB RAM
Answer: C
NEW QUESTION # 117
Refer to the exhibit.
An administrator has an existing cluster and needs to improve performance using AHV Turbo. Which two items are required to achieve even greater performance? (Choose two.)
- A. VMs have multi-queue disabled.
- B. VMs have one vCPU configured.
- C. Workloads are multi-threaded.
- D. VMs have more than one vCPU.
Answer: C,D
Explanation:
NEW QUESTION # 118
An administrator is supporting a business critical environment and deploys metro availability to achieve a zero data loss configuration. The two clusters are connected by a 1GbE connection. A new workload is going to be deployed to this cluster. This workload requires a sustained 150MB/S of write throughput and 20MB/s of read throughput.
Which change must be made to deploy the workload successfully on this cluster?
- A. The workload must be configured to read at greater than 12.5MB/S.
- B. The replication frequency must be less than 60 minutes.
- C. Zero data loss nearsync must be used to support this workload.
- D. The bandwidth must be increased to support this workload.
Answer: D
Explanation:
Reference:
NEW QUESTION # 119
An administrator is configuring an All Flash cluster to support the following workloads:
* Full clone virtual desktops
* Hadoop
* Write heavy databases
Which three correct configuration options should the administrator use to meet the item requirements? (Choose three.) For each procedure, indicate whether it is a correct or incorrect procedure that must be configured to meet the item requirements using the drop-down option.
Answer:
Explanation:
Reference:
NEW QUESTION # 120
Which Windows technology does AHV support to prevent authentication theft?
- A. Azure AD Multi-Factor
- B. Active Directory federation Services
- C. Endpoint Manager
- D. Windows Defender Credential Guard
Answer: B
NEW QUESTION # 121
Refer to the exhibit.
An administrator logs in to Prism and sees the status shown in the exhibit within the Hardware Diagram section.
What should the administrator do?
- A. Resolve all alerts and re-import the disks to make sure there is no service disruption.
- B. Restart all CVMs for the cluster to check, confirm health and repartition and add the disks.
- C. Check status of applications running on the cluster and call support
- D. Reseat all disks immediately. If this does not help, reseat the nodes.
Answer: C
NEW QUESTION # 122
......
New Real NCM-MCI-5.20 Exam Dumps Questions: https://www.easy4engine.com/NCM-MCI-5.20-test-engine.html
NCM-MCI-5.20 Exam Dumps - Nutanix Practice Test Questions: https://drive.google.com/open?id=1n7yEXcXB3WMD3W_rrSpXDFA80y26mrAk
