JN0-635 Free Certification Exam Material from Easy4Engine with 90 Questions
Use Real JN0-635 - 100% Cover Real Exam Questions
NEW QUESTION 29
Click the Exhibit button.
A user reports trouble when using SSH to a server outside your organization. The traffic traverses an SRX Series device that is performing NAT and applying security policies.
Referring to the exhibit, which configuration will allow you to see the bidirectional flow through the SRX Series device?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Data is transmitted across the link in plaintext
- B. The link is protected against man-in-the-middle attacks
- C. Data is transmitted across the link in cyphertext
- D. The link is not protected against man-in-the-middle attacks
Answer: C,D
NEW QUESTION 31
You are trying to get a SSH honeypot set up on a Juniper ATP Appliance collector. The collector is running on hardware with two physical interfaces and two physical CPU cores. The honeypot feature is not working.
Which statement is true in this scenario?
- A. The collector must have at least three physical interfaces
- B. The collector must have at least four physical interfaces
- C. The collector must have at least four physical cores
- D. The collector must have at least six physical cores
Answer: A
NEW QUESTION 32
Click the Exhibit button.
You have configured tenant systems on your SRX Series device.
Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication? (Choose two.)
- A. Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch
- B. Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch
- C. Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch
- D. Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch
Answer: A,D
NEW QUESTION 33
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. NAT64
- B. persistent NAT
- C. DS-Lite
- D. NAT46
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 34
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Enable IKEv2 within the VPN configuration on the SRX Series device
- B. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
- C. Enable the split tunneling feature within the VPN configuration on the SRX Series device
- D. Configure split tunneling on the NCP profile on the remote client
Answer: B,D
NEW QUESTION 35
You must troubleshoot ongoing problems with IPsec tunnels and security policy processing. Your network consists of SRX340s and SRX5600s.
In this scenario, which two statements are true? (Choose two.)
- A. You must enable data plane logging on the SRX5600 devices to generate security policy logs
- B. IPsec logs are written to the kmd log file by default
- C. You must enable data plane logging on the SRX340 devices to generate security policy logs
- D. IKE logs are written to the messages log file by default
Answer: A,B
NEW QUESTION 36
Malware that is detonated by the JATP sandbox must be able to communicate with the Internet without being able to harm your local network resources.
Which statement is correct in this scenario?
- A. The honeypot interface must be connected to the Internet zone
- B. The management interface must be connected to the Internet zone
- C. The exhaust interface must be connected to the Internet zone
- D. The monitoring interface must be connected to the Internet zone
Answer: B
NEW QUESTION 37
Click the Exhibit button.
While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?
- A. Verify that the connectivity association key and the connectivity association key name match on both devices
- B. Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use
- C. Verify that the transmission path is not replicating packets or correcting frame check sequence error packets
- D. Verify that the interface between the two devices is up and not experiencing errors
Answer: A
NEW QUESTION 38
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. ARP security is securing data across the control interface
- B. MACsec is securing data across the control interface
- C. IPsec is securing data across the control interface
- D. SSH is securing data across the control interface
Answer: B
NEW QUESTION 39
You are asked to set up notifications if one of your collector traffic feeds drops below 100 kbps.
Which two configuration parameters must be set to accomplish this task? (Choose two.)
- A. Set a traffic SNMP trap on the JATP appliance
- B. Set a traffic system alert on the JATP appliance
- C. Set a general triggered notification on the JATP appliance
- D. Set a logging notification on the JATP appliance
Answer: B,D
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- B. You can secure intra-VLAN traffic with a security policy on this device
- C. The device can pass Layer 2 and Layer 3 traffic at the same time
- D. You can secure inter-VLAN traffic with a security policy on this device
Answer: A,B
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ethernet-port-switching- modes.html
NEW QUESTION 41
You correctly configured a security policy to deny certain traffic, but logs reveal that traffic is still allowed.
Which specific traceoption flag will help you troubleshoot this problem?
- A. configuration
- B. routing-socket
- C. lookup
- D. rules
Answer: C
NEW QUESTION 42
You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?
- A. A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.
- B. An IPsec group VPN with the corporate firewall acting as the hub device.
- C. A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.
- D. Full mesh IPsec VPNs with tunnels between all sites.
Answer: B
Explanation:
Reference:
https://www.juniper.net/us/en/local/pdf/app-notes/3500202-en.pdf
NEW QUESTION 43
You are asked to configure a new SRX Series CPE device at a remote office. The device must participate in forwarding MPLS and IPsec traffic.
Which two statements are true regarding this implementation? (Choose two.)
- A. A firewall filter must be configured to enable packet mode forwarding
- B. Host inbound traffic must not be processed by the flow module
- C. Host inbound traffic must be processed by the flow module
- D. The SRX Series device can process both MPLS and IPsec with default traffic handling
Answer: A,B
NEW QUESTION 44
Exhibit.
A hub member of an ADVPN is not functioning correctly.
Referring the exhibit, which action should you take to solve the problem?
- A. [edit security]
user@hub-1# delete ike gateway advpn-gateway advpn partner - B. [edit interfaces]
user@hub-1# delete ipsec vpn advpn-vpn traffic-selector - C. [edit interfaces]
root@vSRX-1# delete st0.0 multipoint - D. [edit security]
user@hub-1# set ike gateway advpn-gateway advpn suggester disable
Answer: B
NEW QUESTION 45
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. ARP security is securing data across the control interface
- B. MACsec is securing data across the control interface
- C. IPsec is securing data across the control interface
- D. SSH is securing data across the control interface
Answer: B
NEW QUESTION 46
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Source NAT with PAT is occurring
- B. Static NAT without PAT is occurring
- C. Destination NAT is occurring
- D. Source NAT without PAT is occurring
Answer: A
NEW QUESTION 47
Click the Exhibit button.
Which statement is correct regarding the information show in the exhibit?
- A. The tunnel is not encrypting the traffic
- B. The tunnel binding was discovered automatically
- C. The tunnel gateway address was automatically discovered
- D. The output is for an ADVPN
Answer: D
NEW QUESTION 48
Click the Exhibit button.
While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?
- A. Verify that the connectivity association key and the connectivity association key name match on both devices
- B. Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use
- C. Verify that the transmission path is not replicating packets or correcting frame check sequence error packets
- D. Verify that the interface between the two devices is up and not experiencing errors
Answer: A
NEW QUESTION 49
Click the Exhibit button.
The exhibit shows a snippet of a security flow trace. A user cannot open an SSH session to a server. Which action will solve the problem?
- A. Create a route to the desired server
- B. Edit the source NAT to correct the translated address
- C. Create a route entry to direct traffic into the configured tunnel
- D. Create a security policy that matches the traffic parameters
Answer: D
NEW QUESTION 50
......
Dumps Brief Outline Of The JN0-635 Exam: https://www.easy4engine.com/JN0-635-test-engine.html
JN0-635 Training & Certification Get Latest Junos Security : https://drive.google.com/open?id=1mrGdy7PHUhszqxyMNvbKx4dh4UhISH_C
