Pass Your Exam With 100% Verified CTS Exam Questions
CTS Dumps PDF - CTS Real Exam Questions Answers
Axis Communications CTS Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 13
Which frequencies are amplified by a subwoofer?
- A. lowest
- B. mid-high
- C. highest
- D. mid-low
Answer: A
Explanation:
Subwoofers are designed to amplify the lowest frequencies, typically ranging from about 20 Hz to 200 Hz.
These low-frequency sounds are crucial for producing deep bass tones in audio systems, enhancing the overall listening experience by providing a richer and fuller sound.
NEW QUESTION # 14
During a site survey of a facility to be upgraded or modernized, it is important to check wireless microphones that may be redeployed to ensure
- A. antenna design will not interfere with HDBaseT signal distribution system.
- B. microphones are operating on acceptable radio frequencies.
- C. polar patterns will not clash with new fabric treatments.
- D. battery types conform to environmental concerns.
Answer: B
Explanation:
When upgrading or modernizing a facility, it is essential to check that wireless microphones are operating on acceptable radio frequencies. This ensures compliance with local regulations and avoids interference with other wireless devices. The radio frequency spectrum can change over time, and certain frequencies may be reallocated or restricted, making it necessary to verify that existing equipment is still compliant and operational within the allowable frequency bands.
NEW QUESTION # 15
A client setting terms for "tire protection of existing conditions" would most likely apply to which of tire following project types?
- A. A prefabricated building
- B. A technology refresh
- C. New construction
- D. Expansion of an existing building
Answer: D
NEW QUESTION # 16
When discussing a proposed audiovisual project with a new customer, it is important for the salesperson to FIRST
- A. consult with the project manager to determine the availability of staff to complete the installation.
- B. conduct a survey of end users to determine the project goals.
- C. identify the key decision makers and stakeholders in the client's organization.
- D. prepare a detailed layout of the equipment and cabling requirements.
Answer: C
Explanation:
When discussing a proposed audiovisual project with a new customer, it is essential for the salesperson to first identify the key decision makers and stakeholders in the client's organization. This step ensures that all relevant parties are involved in the decision-making process and that their needs and expectations are understood and addressed. It also facilitates smoother communication and project approval processes.
References:
* Axis Communications - Client Engagement and Sales Strategies
* Customer Relationship Management (CRM) Best Practices
NEW QUESTION # 17
As part of a service agreement offering, wfwt PRIMARY role do preventive maintenance visits (PM/PMV) play?
- A. allows the AV provider toclean, service and assess equipment In the field on a regular basis
- B. allows the AV provider tosell a service that is often forgotten by the customer, and therefore generate greater profit
- C. allows the AV provider to check in with customer and serves as an opportunity to sell further solutions
- D. allows the AV provider access to client premises and scope future work
Answer: A
Explanation:
Preventive maintenance visits (PM/PMV) are primarily designed to ensure that equipment is functioning correctly and to prevent potential failures. This involves cleaning, servicing, and assessing the equipment regularly to maintain optimal performance and longevity. This is in line with industry standards for preventive maintenance, ensuring reliability and reducing downtime.
NEW QUESTION # 18
Which section of the Ohm's Law chart should be used to calculate values expressed in Ohms? Select the answer by clicking anywhere within thecorrectquadrant.
Answer:
Explanation:
Explanation:
Ohm's Law is a fundamental principle used in electrical engineering and physics to describe the relationship between voltage (V), current (I), resistance (R), and power (P). The Ohm's Law chart is divided into four quadrants, each representing different formulas and relationships among these quantities.
To calculate values expressed in Ohms (which represent resistance, R), you should use Quadrant D. This quadrant contains formulas that solve for resistance (R), using various combinations of voltage (V), current (I), and power (P):
* R=VIR = \frac{V}{I}R=IV
* R=V2PR = \frac{V^2}{P}R=PV2
* R=PI2R = \frac{P}{I^2}R=I2P
These formulas are derived from Ohm's Law and the power equations, providing different ways to calculate resistance based on the available information.
References:
* Ohm's Law: Explains the relationship between voltage, current, and resistance.
* Power Formulas: Derived from the basic Ohm's Law equations and used to relate power with resistance, voltage, and current.
To further verify and detail the usage of Ohm's Law chart, you can refer to Axis Technology Specialist documentation or any standard electrical engineering textbooks which provide detailed explanations of these formulas and their applications.
Top of Form
Bottom of Form
NEW QUESTION # 19
When planning to use audio equipment on a converged enterprise network, it may be desirable to separate broadcast domains in order to
- A. avoid audio feedback between devices.
- B. avoid crosstalk between multi track channel packets.
- C. avoid delaying time sensitive AV traffic on the network.
- D. comply with local electrical and telecommunication regulations.
Answer: C
Explanation:
When using audio equipment on a converged enterprise network, separating broadcast domains is essential to avoid delaying time-sensitive AV traffic. AV traffic, such as audio and video streams, requires low latency and minimal jitter to maintain quality. By segregating these streams from other types of network traffic, such as data and general communications, network performance can be optimized, ensuring that AV services operate smoothly without interruption.
References:
* Axis Communications - Network Design and AV Integration
* IT and Network Management Best Practices
NEW QUESTION # 20
In order to mount a projector so that it is horizontally centered with the suspended screen, the technician should look at which drawings in the plans?
- A. elevations
- B. detail
- C. sections
- D. reflected ceiling
Answer: D
Explanation:
To mount a projector so that it is horizontally centered with the suspended screen, the technician should look at the reflected ceiling drawings in the plans. Reflected ceiling plans provide a view from above, showing the layout and alignment of ceiling elements, including projectors, screens, lighting, and other fixtures. This perspective is essential for ensuring that the projector is correctly aligned with the screen. Axis Technology Specialist documentation highlights the use of reflected ceiling plans for precise alignment of AV equipment.
NEW QUESTION # 21
One MAIN benefit of multicast over unicast in a network AV solution is it
- A. supports higher video resolutions.
- B. reduces network bandwidth whenusing multipleencoders.
- C. supports multi-channel audio.
- D. reduces network bandwidth whenusing multipledecoders.
Answer: D
Explanation:
Multicast transmission in a network AV solution significantly reduces network bandwidth when using multiple decoders. With multicast, a single stream of data is sent from the source and is then distributed to multiple recipients by the network infrastructure. This contrasts with unicast, where a separate stream is sent to each recipient, leading to higher bandwidth consumption. Multicast is particularly efficient in scenarios where the same content needs to be delivered to multiple devices, such as digital signage or IPTV.
NEW QUESTION # 22
Which of the following is the BEST service when new firmware is available for installed equipment across a fleet of conference rooms?
- A. a ringed update approach
- B. updating them all at once
- C. replacing the equipment
- D. keeping current version
Answer: A
Explanation:
The ringed update approach is the best service when new firmware is available for installed equipment across a fleet of conference rooms. This approach involves updating the firmware in phases or "rings," starting with a small group of devices to ensure that the update is stable and does not introduce new issues. Once the initial ring is confirmed to be successful, the update is gradually rolled out to additional groups, reducing the risk of widespread problems. This method allows for controlled testing and monitoring, ensuring that any issues can be addressed before the update is applied to all devices.
Top of Form
Bottom of Form
NEW QUESTION # 23
Which of the following is the MOST SUITABLE security method for a small portable projector?
- A. Nylock nuts and bolts
- B. security screws
- C. adjustable mount
- D. cable lock
Answer: D
NEW QUESTION # 24
Remotely monitoring system health of a deployed conference room and rebooting it when faulty is an example of
- A. troubleshooting.
- B. a service call.
- C. proactive maintenance.
- D. a service contract.
Answer: C
Explanation:
Proactive maintenance involves regularly monitoring and maintaining systems to prevent issues before they occur. Remotely monitoring system health and performing actions like rebooting faulty equipment are preventive measures that help maintain system reliability and functionality. This approach reduces the likelihood of system failures and downtime, ensuring that the conference room equipment operates smoothly.
NEW QUESTION # 25
When an audio device can no longer accurately reproduce the audio signal, It is called
- A. dithering.
- B. distortion.
- C. feedback.
- D. saturation.
Answer: B
Explanation:
Distortion occurs when an audio device can no longer accurately reproduce the input audio signal. This happens when the signal exceeds the device's capacity to process it linearly, resulting in a corrupted output that differs from the original signal. Distortion can be caused by overloading the device's input or output stages, improper gain settings, or defects in the audio components. It degrades the quality of the audio signal and can manifest as unwanted noise or alterations in the sound.
NEW QUESTION # 26
In a request for proposal (RFP) document, what would be the BEST place to find the overall expectations and contractual requirements for the project?
- A. block diagram
- B. system drawings
- C. bill of materials
- D. scope of work
Answer: D
Explanation:
The Scope of Work (SOW) section in an RFP document outlines the overall expectations and contractual requirements for the project. It provides a detailed description of the work to be performed, including deliverables, timelines, and specific tasks. The SOW ensures that all parties have a clear understanding of the project's objectives and responsibilities, serving as the foundation for the project's execution and management.
Top of Form
Bottom of Form
NEW QUESTION # 27
When designing a projection system for an auditorium, what are the PRIMARY design considerations?
- A. presenter position, viewing area, aspect ratio
- B. inverse square law, screen gain, reverberation
- C. HVAC layout, rear projection, text height
- D. viewing cone, viewing distance, viewing angle
Answer: D
Explanation:
The primary design considerations for a projection system in an auditorium include the viewing cone, viewing distance, and viewing angle. These factors determine the optimal placement and size of the projection screen to ensure that all audience members have a clear and comfortable view. The viewing cone defines the area in which the screen can be clearly seen, the viewing distance impacts the size of the text and images, and the viewing angle ensures the image is visible without distortion from various seating positions.
NEW QUESTION # 28
An application requires Its equipment to be operational 24 hours a day and the owner considers the system mission critical. What type of warranty would be BEST for the equipment?
- A. implied warranty
- B. limited warranty
- C. manufacturer's factory warranty
- D. advanced replacement warranty
Answer: D
Explanation:
For a system that is mission-critical and requires 24-hour operation, an advanced replacement warranty is the best option. This type of warranty ensures that if a piece of equipment fails, a replacement is shipped immediately, often before the defective unit is returned. This minimizes downtime and ensures that the system remains operational, which is crucial for mission-critical applications.
References:
* Axis Communications - Warranty and Service Options
* Industry Standards for Critical Systems Maintenance
NEW QUESTION # 29
What is a MAIN benefit of an externally managed AV/IT service?
- A. on-demand availability of computer system resources
- B. reduce costs for business-software
- C. cost reduction in operations through clear responsibilities
- D. complete outsourcing of the AV/IT department
Answer: C
NEW QUESTION # 30
The integrator gets an urgent service call from the client's AV engineer that there is no power indication on the HDMI switcher in the rack. What is the BEST workaround that the integrator can suggest?
- A. patch the Input to the output, bypassing the switcher
- B. change the power supply of the faulty unit
- C. bring in another switcher to replace the broken one
- D. call the manufacturer for support
Answer: A
Explanation:
The best immediate workaround is to patch the input directly to the output, bypassing the switcher. This allows the system to continue functioning while a more permanent solution is found. It ensures that the client experiences minimal downtime and disruption. Changing the power supply or replacing the switcher are also viable options, but they may take more time and resources. Calling the manufacturer for support can also be part of the solution process, but it doesn't provide an immediate workaround.
NEW QUESTION # 31
......
CTS Dumps 100 Pass Guarantee With Latest Demo: https://www.easy4engine.com/CTS-test-engine.html
Prepare CTS Question Answers Free Update With 100% Exam Passing Guarantee [2024]: https://drive.google.com/open?id=1G20eT0mjd41ZxOiP7PTd8eUBU5nZqdDZ
