Real JN0-1361 are Uploaded by Easy4Engine provide 2021 Latest JN0-1361 Practice Tests Dumps.
All JN0-1361 Dumps and Service Provider Design, Specialist (JNCDS-SP) Training Courses Help candidates to study and pass the Service Provider Design, Specialist (JNCDS-SP) Exams hassle-free!
NEW QUESTION 32
Your customer is deploying a multi-tenant data center and needs help with the WAN edge design.
What are two main design considerations for this environment? (Choose two)
- A. support for data collection and analysis
- B. support for unified threat management
- C. support for Virtual Chassis Control Protocol
- D. support for Network Address Translation
Answer: A,D
NEW QUESTION 33
You are designing an EVPN data center solution with VXLAN.
Which two statements are true in this scenario? (Choose two )
- A. The original MAC address is advertised to remote PEs.
- B. The original MAC address is prepended to a VXLAN VNI.
- C. The original MAC address is replaced by a VXLAN VNI.
- D. The original MAC address is encapsulated within the VXLAN frame.
Answer: A,D
NEW QUESTION 34
Your backbone network has a single dark fiber between two backbone sites within the same metro are a. Currency this link is being used as a point-to-point 100ObE link between the routers using gray optics. The link has been experiencing high utilization and you are asked to propose network design changes to increase capacity across this network segment.
Which statement is true in this scenario?
- A. New optical interfaces will need to be added to the routers.
- B. Enabling MPLS will increase capacity due to statistical multiplexing.
- C. Gray optics can be used to increase capacity by enabling additional wavelengths.
- D. Interfaces need to be reconfigured for 200GbE.
Answer: A
NEW QUESTION 35
You are designing a multi-site data center environment with data center interconnects between sites.
Which two statements are true in this scenario? (Choose two. )
- A. All data centers must be in the same Layer 2 broadcast domain and subnet.
- B. EVPN with VXLAN can be used to interconnect the multiple sites.
- C. VPLS can be used to interconnect the multiple sites.
- D. The data centers must be connected with a full mesh design.
Answer: B,C
NEW QUESTION 36
MPLS services are being delivered from provider edge (PE) routers Each PE is connected to multiple customer edge (CE) routers.
What should you use on the PE to isolate customer routes?
- A. VPN routing and forwarding tables
- B. external BGP
- C. port access control lists
- D. access control lists
Answer: A
NEW QUESTION 37
You are implementing an MPLS-based WAN environment to connect remote sites to the corporate headquarters (HQ) However, the service provider at the HQ location does not provide service at the location of one of the remote sites.
Which statement is true in this scenario?
- A. A circuit can be bridged across multiple service providers for end-to-end connectivity.
- B. A dedicated leased line will need to be used to connect to the remote site.
- C. A public WAN circuit can be provisioned over the Internet that will provide the same level of service.
- D. A hub site in a location where both service providers have a presence will need to be deployed.
Answer: A
NEW QUESTION 38
Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)
- A. The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.
- B. MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.
- C. A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.
- D. MPLS labels enable several logically separated networks to share a common network infrastructure.
Answer: B,D
NEW QUESTION 39
Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27. 10.0/24 network receives top priority through your network.
Which action will satisfy this requirement?
- A. Apply a multifield classifier to the ingress interfaces.
- B. Apply a custom rewrite rule to the ingress interface.
- C. Apply a behavior aggregate classifier to the egress interface.
- D. Apply a custom scheduler map to the ingress interface.
Answer: A
Explanation:
We would need MF to match the address and set the forwarding class.
NEW QUESTION 40
You are designing a solution for an energy trading organization that allows them to stream natural gas prices to trading partners. Prices will be streamed to trading partners using the Internet. Trading regulations require that any trading data streamed over a public network must be encrypted and authenticated.
Which connectivity solution meets these requirements?
- A. VPLS
- B. L3VPN
- C. L2VPN
- D. IPsec
Answer: D
NEW QUESTION 41
Which two statements about a customer's WAN connectivity are correct? (Choose two)
- A. SD-WAN dynamically manages customer traffic across multiple WAN connections.
- B. Layer 3 managed services automatically include Layer 2 provisioning to support the customer's needs.
- C. SD-WAN requires an IPsec tunnel to connect customer sites across the Internet.
- D. Layer 2 managed services connects the customer's sites and the customer provides their own routing capability.
Answer: A,D
NEW QUESTION 42
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology. Which protocol is recommended for this purpose?
- A. ISIS
- B. BGP-LS
- C. OSPF
- D. PIM-SSM
Answer: B
NEW QUESTION 43
Your applications are migrating from a legacy data center to an EVPN over a VXLAN-based VM environment. A few critical legacy applications not support this environment and must remain on bare metal servers and the applications must be able to access the Internet.
What must be included in the VXLAN design to satisfy these requirements?
- A. VTEP tunneling
- B. SR-IOV
- C. nested VM capability
- D. VXLAN gateway
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/solutions/topics/concept/solutionevpn-vxlan-understanding.html
NEW QUESTION 44
Your customer requires virtual machine mobility between two data centers, and they are pursuing a managed service. Which solution would satisfy the customer's requirement?
- A. a routed service
- B. an EVPN service provided over IP
- C. an IPsec VPN service between CE routers
- D. an L3VPN service
Answer: D
NEW QUESTION 45
Your customer's enterprise is adding geographically-dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost but the branches must remain secure with low latency.
Which type of Internet access model satisfies the customer's requirement in this scenario?
- A. centralized model with security at each branch
- B. distributed model with security at the hub
- C. centralized model with security at the hub
- D. distributed model with security at each branch
Answer: D
NEW QUESTION 46
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?
- A. MP-BGP
- B. MPLS
- C. VXLAN
- D. EVPN
Answer: C
NEW QUESTION 47
Exhibit:
Within ISP E, R1 is load-balancing traffic destined to ISP D over the R1-R2-R5 and R1-R4-R5 paths. At some point, a link degradation event occurs in the network as shown in the exhibit. You want R1 to rapidly learn of the path failure.
- A. Enable Bidirectional Forwarding Detection between R1 and R4.
- B. Adjust the OSPF hello timer to a subsecond value between R4 and R5.
- C. Adjust the OSPF hello timer to a subsecond value between R1 and R4.
- D. Enable Bidirectional Forwarding Detection between R4 and R5.
Answer: D
NEW QUESTION 48
Exhibit:
You are asked to ensure that most traffic that traverses your network is load balanced over all of the equal cost links between the routers in your network. However, you must also ensure that traffic from ISP A that is destined for ISP D must traverse the R1-R2-R3-R4-R5 path.
Referring to the exhibit how would you accomplish this task?
- A. Force the ISP A to ISP D traffic over RSVP-signaled LSPs.
- B. Adjust the BGFs LOCAL PREF attribute to ensure that the raw IP packets follow the required path.
- C. Adjust the OSPF metrics of each link so that the raw IP packets follow the required path.
- D. Force the ISP A to ISP D traffic over LDP-signaled LSPs.
Answer: A
NEW QUESTION 49
......
Valid Way To Pass Juniper's JN0-1361 Exam with : https://www.easy4engine.com/JN0-1361-test-engine.html
