Latest Success Metrics For Actual DES-4122 Exam (Updated 60 Questions)
Genuine DES-4122 Exam Dumps Free Demo Valid QA's
NEW QUESTION 32
Which mobile devices are supported by Quick Sync 2.0 in 14G PowerEdge servers?
- A. iOS, Android, and Windows Phone devices
- B. iOS devices only
- C. Android devices only
- D. iOS and Android devices only
Answer: D
NEW QUESTION 33
A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode. What is the minimum size DIMM supported for this type of memory?
- A. 512 GB
- B. 256 GB
- C. 64 GB
- D. 128 GB
Answer: B
NEW QUESTION 34
After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?
- A. System Profile to Performance in the iDRAC GUI
- B. Rebuild Rate in the iDRAC GUI
- C. System Profile to Performance in the BIOS settings
- D. Rebuild Rate in the BIOS settings
Answer: B
NEW QUESTION 35
What is the correct order of steps taken during the BIOS/UEFI Recovery process?
Answer:
Explanation:
NEW QUESTION 36
An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 37
What is the minimum number of components, beside the system board, required to POST?
- A. 1 PSU, 1 CPU, 1 DIMM, and PERC SAS controller
- B. PSUs, CPUs, and DIMMs as configured in BIOS
- C. 1 PSU, 1 DIMM, and 1 CPU only
- D. 1 PSU and 1 CPU only
Answer: C
NEW QUESTION 38
Which type of access is known as Firmware RACADM on a Dell EMC PowerEdge server?
- A. Accessing RACADM with OpenManage software
- B. Accessing RACADM running the Dell Toolkit
- C. Logging into iDRAC using SSH or Telnet
- D. Logging into iDRAC through Boot Manager
Answer: C
NEW QUESTION 39
A technician working with a Dell EMC PowerEdge 1 take corrective action?
- A. Check the System Event Log
Check PSU LED
Reseat the PSU - B. Check the LCC Log
Check PSU LED
Reseat the PSU - C. Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC - D. Check the LCC Log
Check PSU LED
Reseat the CPU
Answer: C
NEW QUESTION 40
What is a characteristic of out-of-band management?
- A. Dedicated device
- B. Dependent upon OS
- C. Less secure
- D. Agent based
Answer: A
NEW QUESTION 41
You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives Which PERC model best supports this configuration?
- A. S140
- B. H740T
- C. H330
- D. H740P
Answer: A
NEW QUESTION 42
A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials How could the technician change the iDRAC password?
- A. SupportAssist Enterprise
- B. iDRAC Web GUI
- C. OpenManage Server Administrator
- D. Virtual Console; press F2 after rebooting system
Answer: A
NEW QUESTION 43
What is required to use the iSM Automatic System Recovery feature?
- A. OS watchdog timer enabled
- B. Server Administrator installed
- C. OS watchdog timer disabled
- D. Server Administrator not installed
Answer: C
NEW QUESTION 44
What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?
- A. Flexibility to choose interconnects
- B. Fixed networking card
- C. Provide a hot-swap component
- D. Consume a PCIe slot
Answer: B
NEW QUESTION 45
What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?
- A. Ensures that the server has a valid Service Tag number
- B. Ensures that no unauthorized BIOS or firmware codes are run
- C. Ensures that the installed operating system is authentic
- D. Ensures that the server boots only when connected to a verified network
Answer: B
NEW QUESTION 46
Which processor configuration is used by the Dell EMC PowerEdge R740 server?
- A. 2 socket AMD
- B. 4 socket AMD
- C. 2 socket Intel
- D. 4 socket Intel
Answer: C
NEW QUESTION 47
For a temporary migration task the CPU core count on the Dell EMC PowerEdge R640 server needs to be reduced to 8 because the installed application will not work due to license restrictions. Use the simulator to apply the change so the application can be installed.
When you have finished using the simulator, click Next.
Answer:
Explanation:
Send us your suggestion for this simulation task.
NEW QUESTION 48
You are Investigating a disk error on a Dell EMC PowerEdge server and discover a Hot Spare has not been assigned to the Virtual Disk Group. Use the simulator to assign the Global Hot Spare. When you have finished using the simulator, dick Next.
Answer:
Explanation:
Send us your suggestion for this simulation task.
NEW QUESTION 49
A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad
1Gb NIC and redundant power supplies The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC What should the technician do to verify iDRAC connectivity on each server?
- A. iDRAC dedicated NIC port is cabled and the link light is green
- B. iDRAC Datacenter license is installed.
- C. Ethernet port LOM1 is cabled and the link light is green.
- D. iDRAC Enterprise license is installed
Answer: A
NEW QUESTION 50
What must be done before upgrading OMSA from the 32-bit to the 64-bit version?
- A. Back up the configuration
- B. Save the license file
- C. Uninstall the earlier version
- D. Disable UAC
Answer: B
NEW QUESTION 51
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?
- A. Dispatches technical support from Dell for all Dell servers, storage, and networking devices
- B. Includes onsite monitoring and automated collection of system state information
- C. Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices
- D. Proactive, predictive, and automated support technology to enable faster resolution and reporting
Answer: B
NEW QUESTION 52
For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.
Answer:
Explanation:
Send us your suggestion for this simulation task.
NEW QUESTION 53
What happened on April 30, 2019?

Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 54
How can a technician know whether IDRAC9 System Lockdown mode is enabled?
- A. Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
- B. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots
- C. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
- D. Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
Answer: D
NEW QUESTION 55
A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed How can the technician upgrade the license?
- A. Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
- B. Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down
- C. The license cannot be upgraded on a single PSU system
- D. The license cannot be upgraded because the user will not allow the server to be powered on
Answer: C
NEW QUESTION 56
......
DES-4122 Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://www.easy4engine.com/DES-4122-test-engine.html
Printable & Easy to Use DCS-IE DES-4122 Dumps 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1SPy-SxqyHzMXJtXejhs44IZGFt3Pfo5Y

